Adriatic marina
 
 

news


 image001



„SANDBLASTING"
TECHNICAL SURFACE PREPARATION
WITH GLASS BEADS AND SODA

 image001EN

 

TECHNOLOGY WITH GLASS BEADS

Dustless bluster" devices use glass beads with the same standards and treatment results on different materials ( GRP, steel, aluminium , wood, stone) as former medias but far more eco and user friendly.
The advantage of this process to others is that this method is innovative, for all uses, organic and environmental. The technology enables fast cleaning by saving time and money to the ship's owner.

Among other things, suitable for:
• Removing antifouling, paint, primer, rust
• Osmosis treatment

Benefits:
• Possibility of using a variety of size beads depending on the surface media and condition.
• The treated surface is much smoother and brighter which reduces the costs of applying kit for levelling and the surface is immediately ready for further application.
• Contains no toxic or heavy metals, no sparking.
• No dust by adding water.
• Inhibits rust for 72 hours on the treated surfaces.

On treated surfaces, products from International, Hempel, Venezani, Jotun, will be applied, according to the customer request.

Price
Technical hull surface treatment up to gel coat 220 kn/m2
Technical hull surface treatment up to laminate 275 kn/m2

VAT (25%) in the price included. For other treatments, information and price according to the inquiry

 image008Hull surface treatment up to gel coat



image007Hull surface treatment up to laminate

TECHNOLOGY WITH SODA

The soda blasting process is cleaning the surface with free energy of crystal soda which breaks and releases energy by hitting the surface. Soda blasting is a non-destructive method; will not damage seals and rubbers, Suitable for plastic, wood, aluminium and other alloys.

Used for degreasing surfaces, cleaning engines, propellers, shaft lines, trim tabs, Z -drives and other ship parts and deck equipment.




Information and price according to the inquiry.

 image012Rudder treatment

Please be free to contact us! -Reception Yacht service
Tel. +385 51 654 120; Fax +385 51 654 121 yacht-service@marina-punat.hr


about us


The Shipyard Punat was founded in 1922 by Nikola Zoric who started, as the owner, the business of shipbuilding with 11 employees on an area of 1654m2.

On only two slipways, mainly wooden vessels were built up to 350t. Boats made of wood: rafts, boats, barges, fishing boats, patrol boats, sailing boats, cargo boats and yachts. At that time the shipyard becomes wide well known.

In the eighties of the 20th century, the Shipyard Punat is the biggest for constructing wooden vessels in Croatia.

In time past mainly oriented to wood as a constructive material for shipbuilding, today the shipyard on its facilities, with employees and various subcontractors offers a refit and repair for all kind of working boats and large yachts up to 50 m length.
shipyard1
shipyard2
shipyard3
shipyard4
shipyard5
shipyard6

capacity and equipment



Capacity

Set on 30 000 sqm waterfront the premises include:

160 m pier space for sea berth and work performing

Equipment

- Travel lift 50t
- Travel lift 100t
- Transport vehicle for vessels up to 20t
- Transport vehicle for vessels up to 30t
- Telescopic work platform for work up to 21m
- Tug boat

Slipway

- Slipway 600t for vessels up to 50m
- Slipway 450 t for catamarans up to 50 m
- Slipway 150 t for vessels up to 30 m

shipyard14Covered area

- Hale, dimension 60x20x10m with overhead crane 50x11m, capacity 3t
- Hale, dimension 38x9, 2x8m
- Shed, dimension 50x22x5m

Tend construction on slipways or in the service area for vessel which cannot be transported under a covered area. Power supply distribution on the shipyard working area, with connectors for compressed air, water and electricity..
shipyard11
shipyard12
shipyard13

service


In time past basically constructing mainly wooden vessels, today the shipyard offers on its facilities and within cooperation of its subcontractors a complete service including:
  • Repair, Refit and Maintenance
  • Engines sale ,service and installation, including spare parts
  • Work in plastic, wood, steel, aluminum and inox
  • Electrical and electronics work
  • Metal and pipeline work
  • Carpentry and upholstery
  • Hydraulic work

Authorized service for
volvo-penta
mercury mercruiser logo1
man
CAT
yanmar
cummins marine
weber 1
perkins-logo
suzuki marine logo
tohatsu
yamaha logo
Johnsom
evinrude
thumb zf logo
kohler
 

Certificate for Approval of the manufacturer - Croatian Register of Shipping
Field of approval:

contact


 

Company nameBRODOGRADILIŠTE PUNAT d.o.o
AddressObala 5, HR-51521 PUNAT
OIB40743486752
MB
03813592
  
MBS040090135
  
DirectorMario Wagner,dipl.ing.
Chairman Supervisory boardPetar Žic,dipl.ing.
  
Share Capital20.373.600 HRK
Commercial Court in RijekaTt-07/2166-5
  
Phone++385 51 654 125
Fax++385 51 654 192
E-mailinfo@brodogradiliste-punat.hr
Working hours
8:00-16:00 Monday- Friday
 Yacht service
Phone++385 51 654 123
Fax++385 51 654 121
E-mailyacht-service@marina-punat.hr
Working hours8:00-16:00 Monday- Saturday
  
 Engine spare parts shop
  
Phone++385 51 654 312
Fax++385 51 654 304
E-mailzoran.vulin@marina-punat.hr
Working hours8:00-16:00 Monday- Saturday
  
  
Yacht service and spare part shop are closed on Sundays and Holidays.


Commercial bank

Erste & Steiermärkische Bank d.d.

Žiro račun: 2402006-1100396277

Devizni račun: 70010000-03813592

IBAN HR8524020061100396277

SWIFT: ESBCHR22

Privredna banka Zagreb d.d.

Žiro račun: 2340009-1117049773

Devizni račun: 70010-019805

IBAN HR61 2340 0091 1170 49773

SWIFT PBZGHR2X